Zanussi Range ZKT 641 H User Manual

Ceramic hob  
ZKT 641 H  
Installation and Operating Instructions  
g
 
Contents  
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
4
4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
5
5
5
6
6
6
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Halogen cooking zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Switching the double ring cooking zone on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
7
7
7
7
8
8
9
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Electrical Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Installation proud of the work surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Warranty conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Service and Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
3
 
Operating Instructions  
1 Safety instructions  
Cables from electrical appliances must not touch  
the hot surface of the appliance or hot cookware.  
Overheated fat and oil can ignite quickly. When  
cooking with fat or oil (e.g. frying chips) do not  
leave the appliance unattended.  
3
Please comply with these instructions. If you  
do not, any damage resulting is not covered  
by the warranty.  
5
This appliance conforms with the following EU  
Directives:  
Switch the cooking zones off after each use.  
With halogen cooking zones, do not look directly  
into the halogen light, this can damage the eyes.  
73/23/EEC dated 19.02.1973 Low Voltage Direc-  
tive  
89/336/EEC dated 03.05.1989 EMC Directive in-  
clusive of Amending Directive 92/31/EEC  
93/68/EEC dated 22.07.1993 CE Marking Directive  
Safety when cleaning  
For cleaning, the appliance must be switched off  
and cooled down.  
Correct use  
For safety reasons, the cleaning of the appliance  
with steam jet or high-pressure cleaning equip-  
ment is not permitted.  
This appliance should be used only for normal do-  
mestic cooking and frying of food.  
The appliance must not be used as a work surface  
or as a storage surface.  
Additions or modifications to the appliance are not  
permitted.  
How to avoid damage to the appli-  
ance  
The ceramic glass can be damaged by objects fall-  
ing onto it.  
The edge of the ceramic glass can be damaged by  
Do not place or store flammable liquids, highly in-  
flammable materials or fusible objects (e.g. plastic  
film, plastic, aluminium) on or near the appliance.  
being knocked by the cookware.  
Child safety  
Cookware made of cast iron, cast aluminium or  
with damaged bottoms can scratch the ceramic  
glass if pushed across the surface.  
Objects that melt and things that boil over can  
burn onto the ceramic glass and should be re-  
moved straightaway.  
Small children must be kept away from the appli-  
ance.  
Only let older children work on the appliance under  
supervision.  
Do not use the cooking zones with empty cook-  
ware or without cookware.  
General safety  
The appliance may only be installed and connect-  
ed by trained, registered service engineers.  
Built-in appliances may only be used after they  
have built in to suitable built-in units and work sur-  
faces that meet standards.  
In the event of faults with the appliance or damage  
to the glass ceramic (cracks, scratches or splits),  
the appliance must be switched off and discon-  
nected from the electrical supply to prevent the  
possibility of an electric shock..  
Repairs to the appliance must only be carried out  
by trained registered service engineers.  
Safety during use  
Remove stickers and film from the glass ceramic.  
There is the risk of burns from the appliance if used  
carelessly.  
4
 
Description of the Appliance  
Cooking surface layout  
Single cooking zone  
1200W  
Double ring cooking zone  
700/1700W  
Single ring cooking zone  
Halogen 2400W  
Control panel  
Single cooking zone  
1200W  
Control panel layout  
Cooking zone indicators  
Timer function  
Lock  
with pilot light  
Heat setting selection  
Second ring  
On/Off  
Timer display  
Timer  
Double ring pilot light  
Display  
On/Off  
with power indicator  
5
 
Touch Control sensor fields  
The appliance is operated using Touch Control sen-  
sor fields. Functions are controlled by touching sen-  
sor fields and confirmed by displays and acoustic  
signals.  
Touch the sensor fields from above, without covering  
other sensor fields.  
Sensor field  
On / Off  
Function  
Switches appliance on and off  
Increasing heat setting/time  
Decreasing heat setting/time  
Timer selection  
Increase settings  
Decrease settings  
Timer  
Lock  
Locking/unlocking the control panel  
Dual zone touch control  
Switches outside zone  
on and off  
Displays  
Display  
Description  
Cooking zone is switched off  
Keep warm setting is set  
¾
u
Keep warm setting  
Heat settings  
¿ - Ç  
a
Heat setting is set  
Automatic warm up function  
Fault  
Automatic warm-up function is activated  
Malfunction has occurred  
e
h
Residual heat  
Cooking zone is still hot  
l
Child safety device  
Safety cut-out  
Lock/child safety device is set.  
Safety cut-out has been activated  
_
Residual heat indicator  
1
Warning! Risk of burns from residual heat. Af-  
ter being switched off, the cooking zones need  
some time to cool down. Look at the residual  
heat indicator h .  
3
Residual heat can be used for melting and  
keeping food warm.  
6
 
Operating the appliance  
Switching the appliance on and off  
Control panel  
Display  
Pilot light  
lights up  
goes out  
Switch on  
Switch off  
Touch  
Touch  
for 2 seconds  
for 1 second  
¾ / h  
h / none  
wise the appliance automatically switches it-  
self off.  
3
After switching on, within approx. 10 seconds  
a heat setting or a function must be set, other-  
Halogen cooking zone  
With halogen cooking zones full heat is reached  
immediately.  
First place the cookware on the cooking zone and  
then switch on the cooking zone.  
1Important: Never look directly into the halogen  
light, this can damage the eyes.  
Setting the heat setting  
Control panel  
Indicator  
u to Ç  
Ç to ¾  
¾
To increase  
To decrease  
To switch off  
Touch  
Touch  
Touch  
and  
at the same time  
Switching the double ring  
cooking zone on and off  
With the double ring cooking zone the heating sur-  
face can be matched to the size of the cookware.  
Double ring cooking zone  
Sensor field  
Pilot light  
To switch on outside ring  
To switch off outside ring  
Touch  
Touch  
for 1-2 seconds  
for 1-2 seconds  
is lit  
goes out  
7
 
Using the automatic warm-up function  
All cooking zones are equpped with an automatic  
warm up function When setting a heat setting using  
, when starting from ¾, the cooking zone switches  
to full power for a certain amount of time and then  
automatically switches back to the heat setting set.  
Control panel  
possible heat set- Display  
tings  
Switch on  
Touch  
¿ to Æ  
a (after 5 seconds)  
(only when starting at ¾)  
Switch off  
Not used  
Touch  
Touch  
Æ to ¿ / u  
Ç to u  
Æ to u  
Ç to u  
3
3
If during the automatic warm up a a higher  
heat setting is selected, e.g. from Á to Ã, the  
automatic warm up is adjusted.  
If there is still residual heat on the cooking  
zone (display h), the automatic warm up is  
not performed.  
The length of time that the automatic warm up func-  
tion operates depends on the heat setting selected.  
Heat  
setting  
Length of the automatic warm Intermediate  
Length of the automatic warm  
up [min:sec]  
up [min:sec]  
heat setting  
v
1
2
3
4
5
6
7
8
9
0:30  
1:00  
1:40  
4:50  
6:30  
10:10  
2:00  
3:30  
4:30  
---  
2.  
3.  
4.  
5.  
6.  
2:40  
5:30  
8:10  
12:20  
2:30  
Locking/unlocking the control panel  
The control panel, with the exception of the “On/Off”  
sensor field, can be locked at any time in order to  
prevent the settings being changed e.g. by wiping  
over the panel with a cloth.  
Control panel  
Touch  
Display  
Switch on  
Switch off  
l (for 5 seconds)  
Touch  
previously set heat setting  
3
When you switch the appliance off, the locking  
function is automatically switched off.  
8
 
Using the child safety device  
The child safety device prevents unintentional use of  
the appliance.  
Setting the child safety device  
Step  
Control panel  
Switch on the appliance  
(Do not set a heat setting)  
Display/Signal  
1.  
¾
2.  
3.  
Touch  
Touch  
until the signal sounds  
Acoustic signal  
l
Appliance switches off. The child safety device is engaged.  
Releasing the child safety device  
Step  
Control panel  
Switch on the appliance  
Display/Signal  
1.  
2.  
3.  
l
Touch  
Touch  
until the signal sounds  
Acoustic signal  
Appliance switches off. The child safety device is released.  
Overriding the child safety device  
The child safety device can be released in this way  
for a single cooking session; it remains activated af-  
terwards.  
Step  
Control panel  
Switch on the appliance  
Touch and at the same time  
Display/Signal  
1.  
2.  
l
¾ / acoustic signal  
Until the appliance is next switched off, it can used as normal.  
3
After overriding the child safety device, a heat  
setting or a function must be set within  
approx. 10 seconds, otherwise the appliance  
automatically switches itself off.  
9
 
Using the timer  
Function  
Pre-requisite  
Result after time has elapsed  
Automatic cut-out  
With heat setting set  
Acoustic signal  
00flashes  
Cooking zone switches off  
Countdown timer  
Cooking zones are not switched on  
Acoustic signal  
00flashes  
3
3
3
While the countdown timer is activated, no  
cooking zone can be used.  
The countdown timer basically cannot be  
used if a cooking zone is switched on.  
If a cooking zone is switched off, the timer  
function set is also switched off.  
Selecting a cooking zone  
Step  
Control panel  
Display  
1.  
2.  
3.  
4.  
Touch  
Touch  
Touch  
Touch  
once  
Pilot light of the first cooking zone flashes  
once  
once  
once  
Pilot light of the second cooking zone flashes  
Pilot light of the third cooking zone flashes  
Pilot light of the fourth cooking zone flashes  
3
3
If the pilot light is flashing more slowly, the  
heat setting can be set or modified.  
If other timer functions are set, after a few sec-  
onds the shortest remaining time of all the tim-  
er  
functions  
is  
displayed  
and  
the  
corresponding pilot light flashes.  
10  
 
Setting the time  
Step  
1.  
Control panel  
Indicator  
Select  
Touch  
cooking zone  
or  
Pilot light for the cooking zone selected flashes  
00to 99 minutes  
2.  
After a few seconds the pilot light flashes more slowly.  
The time is set.  
The time counts down.  
Switching off the timer function  
Step  
Control panel  
Indicator  
1.  
Select  
cooking zone  
Pilot light of cooking zone selected flashes faster  
Time remaining is displayed  
2.  
Touch  
The time remaining counts backwards to 00.  
The pilot light goes out.  
The Timer function for the selected cooking zone is switched off.  
Changing the time  
Step  
Control panel  
Indicator  
1.  
Select  
cooking zone  
Pilot light of the selected cooking zone flashes faster  
Time remaining is displayed  
2.  
Touch  
or  
01to 99 minutes  
After a few seconds, the pilot light flashes more slowly.  
The time is set.  
The time counts down.  
Displaying the time remaining for a cooking zone  
Step  
Control panel field  
Display  
1.  
Select cooking zone  
Pilot light of the cooking zone selected flashes faster  
The time remaining is displayed  
After a few seconds the pilot light flashes more slowly.  
Switching off the acoustic signal  
Step  
Control panel field  
Acoustic signal  
1.  
Touch  
Acoustic signal to acknowledge.  
Acoustic signal stops.  
11  
 
Safety cut-out  
Cooking surface  
If after switching on the cooking surface, a heat  
setting is not set for a cooking zone within approx.  
10 seconds, the cooking surface automatically  
switches itself off.  
If one or more sensor fields are covered for longer  
than approx. 10 seconds, e.g. by a pan placed  
upon it, a signal sounds and the cooking surface  
switches off automatically.  
If all cooking zones are switched off, the cooking  
surface automatically switches itself off after ap-  
prox. 10 seconds.  
Control panel  
3
Moisture (e.g. a wet cloth) or liquid boiling over  
onto the control panel immediately switches  
all cooking zones off.  
Cooking zones  
If one of the cooking zones is not switched off after  
a certain time, or if the heat setting is not modified,  
the relevant cooking zone switches off automati-  
cally.  
Heat setting  
V, 1- 2  
3- 4  
Switches off after  
6 hours  
5 hours  
4 hours  
1.5 hours  
5
6- 9  
12  
 
Tips on cooking and frying  
3
Information about acrylamides  
According to the latest scientific research, in-  
tensive browning of food, especially in prod-  
ucts containing starch, may present a health  
risk due to acrylamide. Therefore we recom-  
mend cooking at low temperatures and not  
browning foods too much.  
Cookware  
You can recognise good cookware from the bot-  
toms of the pans. The bottom should be as thick  
and flat as possible.  
Cookware made of enamelled steel or with alumin-  
ium or copper bottoms can leave discolourations  
on the ceramic glass surface which are difficult or  
impossible to remove.  
Energy saving  
2
2
Always place cookware on the cooking zone  
before it is switched on.  
If possible, always place lids on the pans.  
2
2
Switch cooking zones off before the end of the  
cooking time, to take advantage of residual  
heat.  
Bottom of pans and cooking zones should be  
the same size.  
13  
 
Examples of cooking applications  
The information given in the following table is for guidance only.  
Heat  
setting  
Cooking  
process  
suitable for  
Cook time  
Tips/Hints  
0
Off position  
Keeping  
food warm  
V
Keeping cooked foods warm  
as required  
Cover  
Hollandaise sauce,  
melting butter, chocolate, gelatine  
Melting  
5-25 mins.  
Stir occasionally  
Cook with lid on  
1-2  
Solidifying  
Fluffy omelettes, baked eggs  
10-40 mins.  
Simmering rice and milk-based  
dishes  
Heating up ready-cooked meals  
Add at least twice as much  
liquid as rice, stir milk dishes  
part way through cooking  
2-3  
3-4  
Simmering  
25-50 mins.  
20-45 mins.  
20-60 mins.  
60-150 mins.  
Steaming  
Braising  
Steaming vegetables, fish  
Braising meat  
With vegetables add only a lit-  
tle liquid (a few tablespoons)  
Use only a little liquid, e. g.:  
max. ¼ l water for 750 g of  
potatoes  
Steaming potatoes  
4-5  
6-7  
Boiling  
Cooking larger quantities of food,  
stews and soups  
Up to 3 l liquid plus ingredi-  
ents  
Frying escalope, veal cordon  
bleu, cutlets, rissoles, sausages,  
liver, roux, eggs, pancakes,  
doughnuts  
Gentle  
frying  
as required  
Turn halfway through cooking  
Turn halfway through cooking  
Hash browns, loin steaks, steaks,  
Flädle (pancakes for garnishing  
soup)  
Heavy  
frying  
5-15 mins.  
per pan  
7-8  
9
Boiling  
Searing  
Deep frying  
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),  
deep frying chips  
14  
 
Cleaning and care  
1
1
Take care! Risk of burns from residual heat.  
Let the appliance cool down.  
Important Sharp objects and abrasive clean-  
ing materials will damage the appliance. Clean  
with water and washing up liquid.  
1
Important Residues from cleaning agents will  
damage the appliance. Remove residues with  
water and washing up liquid.  
Cleaning the appliance after each use  
1.Wipe the appliance with a damp cloth and a little  
washing up liquid.  
2.Rub the appliance dry using a clean cloth.  
Removing deposits  
1.Place the scraper on the glass ceramic surface at  
an angle.  
2.Remove residues by sliding the blade over the sur-  
face.  
3.Wipe the appliance with a damp cloth and a little  
washing up liquid.  
4.Rub the appliance dry using a clean cloth.  
Remove  
immedi-  
ately  
when the appliance has  
cooled down  
Type of dirt  
using  
sugar, food containing sugar  
plastics, tin foil  
yes  
yes  
---  
---  
---  
a scraper*  
limescale and water rings  
fat splashes  
yes  
yes  
yes  
cleaner for glass ceramic  
or stainless steel*  
---  
shiny metallic discolorations  
---  
*Scrapers and cleaners for glass ceramic and stainless steel  
can be purchased in specialist shops, supermarkets, the  
parts department of your local Service Force Centre or from  
3
3
Remove stubborn residues with a cleaner for  
glass ceramic or stainless steel.  
Scratches or dark stains on the glass ceramic  
that cannot be removed do not however affect  
the functioning of the appliance.  
15  
 
What to do if  
Problem  
Possible cause  
Remedy  
The cooking zones will not switch More than 10 seconds have passed Switch the appliance on again.  
on or are not functioning  
since the appliance was switched  
on  
The child safety device is switched Deactivate the child safety device  
on l  
(See the section “Child safety de-  
vice”)  
Several sensor fields were touched Only touch one sensor field  
at the same time  
The sensor fields are partly covered Remove the cloth or the liquid.  
by a damp cloth or with liquid  
Switch the appliance on again.  
Safety cut-out has been triggered Switch the appliance on again  
The lock is switched on l  
Switch off the lock (See the section  
“Locking/unlocking the control  
panel”)  
The residual heat indicator is not  
displaying anything  
If the cooking zone is supposed to  
be hot, call your local Service Force  
Centre.  
The cooking zone was only on for a  
short time and is therefore not hot  
The automatic warm up function is There is still residual heat on the  
Let the cooking zone cool down  
not switching itself on  
cooking zone h  
The highest heat setting is set Ç  
The highest heat setting has the  
same power as the automatic warm  
up function  
The heat setting was set using the 1.Switching off the cooking zone  
sensor field  
1.Set the cooking zone using the  
sensor field  
Acoustic signal sounds and appli- The On/Off sensor field has been  
ance switches itself on and then off covered up, e.g. by a cloth  
again; after 5 seconds another  
Do not place any objects on the  
control panel  
acoustic signal sounds  
_ is lit  
Overheating protection for the  
cooking zone has been triggered  
Switch off the cooking zone.  
Switch the cooking zone on again  
e and number are displayed  
Electronics fault  
Disconnect the appliance from the  
electrical supply for a few minutes  
(Take the fuse out of the house’s  
wiring system)  
If after switching on again, e is dis-  
played again, call the customer  
service department  
16  
 
If you are unable to remedy the problem by fol-  
lowing the above suggestions, please contact  
your local Service Force Centre.  
1
Warning! Repairs to the appliance are only to  
be carried out by qualified service engineers.  
Considerable danger to the user may result  
from improper repairs.  
3
If the appliance has been wrongly operated,  
the visit from the service technician or dealer  
may not take place free of charge, even during  
the warranty period.  
Disposal  
2
Packaging material  
The packaging materials are environmentally  
friendly and can be recycled. The plastic com-  
ponents are identified by markings, e.g. >PE<,  
>PS<, etc. Please dispose of the packaging  
materials in the appropriate container at your  
local waste disposal facilities.  
2
Old appliance  
The symbol  
W
on the product or on its pack-  
aging indicates that this product may not be  
treated as household waste. Instead it shall be  
handed over to the applicable collection point  
for the recycling of electrical and electronic  
equipment. By ensuring this product is dis-  
posed of correctly, you will help prevent po-  
tential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product. For more detailed in-  
formation about recycling of this product,  
please contact your local city office, your  
household waste disposal service or the shop  
where you purchased the product.  
17  
 
Installation Instructions  
Safety instructions  
The laws, ordinances, directives and standards in  
force in the country of use are to be followed (safety  
regulations, proper recycling in accordance with the  
regulations, etc.)  
Installation may only be carried out by a qualified  
electrician.  
The minimum distances to other appliances are to be  
observed.  
Drawers may only be installed with a protective  
board directly under the appliance.  
The cut surfaces of the work top are to be protected  
against moisture using a suitable sealant.  
The sealant seals the appliance to the work top with  
no gap.  
Avoid installing the appliance next to doors and un-  
der windows. Otherwise hot cookware may be  
knocked off the rings when doors and windows are  
opened.  
1
WARNING!  
Risk of injury from electrical current.  
The electrical mains terminal is live.  
Observe connection schematic.  
Observe electrical safety rules.  
Ensure anti-shock protection through correct in-  
stallation by a qualified electrician.  
The appliance must be connected to the electrical  
supply by a qualified electrician.  
1
IMPORTANT!  
Risk of injury from electrical current.  
Loose and inappropriate plug and socket connec-  
tions can make the terminal overheat.  
Have the clamping joints correctedly installed by a  
qualified electrician.  
Use strain relief clamp on cable.  
In the event of single-phase or two-phase connec-  
tion, the appropriate mains cable of type H05BB-F  
Tmax 90° (or higher) must be used.  
If this appliance’s mains cable is damaged, it must  
be replaced by a special cable (type H05BB-F  
Tmax 90°; or higher). The latter is available from  
the Customer Care Department.  
A device must be provided in the electrical installa-  
tion which allows the appliance to be disconnected  
from the mains at all poles with a contact opening  
width of at least 3 mm  
Suitable isolation devices include line protecting cut-  
outs, fuses (screw type fuses are to be removed from  
the holder), earth leakage trips and contactors.  
18  
 
Electrical Connection Diagram  
For UK only: 230V...240V~  
19  
 
Installation proud of the work surface  
Clean the worktop in the area of the cut-out sec-  
tion.  
Stick the one-sided self-adhesive sealing tape  
supplied all the way round the lower edge of the  
cooking surface along the outer edge of the glass  
ceramic panel. Do not stretch it. The cut ends  
should lie in the middle of one side. When you  
have cut it to length (add a few mm), press the two  
ends flush up against one another.  
20  
 
Assembly  
21  
 
22  
 
23  
 
24  
 
Rating Plate  
25  
 
Warranty conditions  
This guarantee relates to you and cannot be trans-  
ferred to another user.  
Standard guarantee conditions  
We, Zanussi, undertake that if within 24 months of  
the date of the purchase this Zanussi appliance or  
any part thereof is proved to be defective by reason  
only of faulty workmanship or materials, we will, at  
our option repair or replace the same FREE OF  
CHARGE for labour, materials or carriage on condi-  
tion that:  
The appliance has been correctly installed and  
used only on the electricity supply stated on the  
rating plate.  
The appliance has been used for normal domestic  
purposes only, and in accordance with the manu-  
facturer’s instructions.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with by any per-  
son not authorised by us.  
Your new home is within the European Community  
(EC) or European Free Trade Area.  
The product is installed and used in accordance  
with our instructions and is only used domestically,  
i.e. a normal household.  
The product is installed taking into account regula-  
tions in your new country.  
Before you move please contact your nearest Cus-  
tomer Care centre, listed below, to give them details  
of your new home. They will then ensure that the lo-  
cal Service Organisation is aware of your move and  
able to look after you and your appliances.  
France  
Germany Nürnberg  
Italy  
Sweden  
UK  
Senlis  
+33 (0) 3 44 62 20 13  
+49 (0) 800 234 7378  
+39 (0) 800 11 7511  
+46 (0) 20 78 77 50  
+44 (0) 1753 219897  
Pordernone  
Stockholm  
Slough  
All service work under this guarantee must be un-  
dertaken by a Service Force Centre.  
Any appliance or defective part replaced shall be-  
come the Company’s property.  
This guarantee is in addition to your statutory and  
other legal rights.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside  
these hours in which case a premium will be  
charged.  
Exclusions  
This guarantee does not cover:  
Damage or calls resulting from transportation, im-  
proper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
Products of Zanussi manufacture which are not  
marketed by Zanussi.  
European Guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new  
home subject to the following qualifications:  
The guarantee starts from the date you first pur-  
chased your product.  
The guarantee is for the same period and to the  
same extent for labour and parts as exists in the  
new country of use for this brand or range of prod-  
ucts.  
26  
 
Service and Spare Parts  
If the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact  
Service Force by telephoning:  
0870 5 929 929  
Your telephone call will be automatically routed to  
the Service Force Centre covering your post code ar-  
ea.  
For the address of your local Service Force Centre  
and further information about Service Force, please  
visit the website at  
Before calling out an engineer, please ensure you  
have read the details under the heading „What to do  
if...“  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code.  
2. Your telephone number.  
3. Clear and concise details of the fault.  
4. The model and serial number of the appliance  
(found on the rating plate)  
5. The purchase date.  
Please note that a valid purchase receipt or guaran-  
tee documentation is required for in-guarantee serv-  
ice calls.  
Customer Care  
For general enquiries concerning your Zanussi appli-  
ance, or for further information on Zanussi products  
please contact our Customer Care Department by  
letter or telephone at the address below or visit our  
website at www.zanussi.co.uk..  
Customer Care Department  
Electrolux  
55-77 High Street  
Slough  
Berkshire, SL1 1DZ  
Tel: 08705 350350 (*)  
For Customer Service in the Republic of Ireland please con-  
tact us at the address below:  
AEG/ Electrolux Group (Ire) Ltd  
Long Mile Road/ Dublin 12  
Republic of Ireland  
Tel: +353 (0) 1 4090751  
(*) Calls may be recorded for training purposes  
27  
 
822 925 198-A-251104-01  
Subject to change without notice  
The Electrolux Group. The world´s No.1 choice.  
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products  
(such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in  
more than 150 countries around the world.  
 

Weed Eater Trimmer 530086916 User Manual
Wells Gardner Computer Monitor D9500 User Manual
Westinghouse Computer Monitor L2210NW User Manual
Westinghouse Personal Lift 77027 User Manual
Whirlpool Cooktop 388 User Manual
Whirlpool Freezer ET22DQ User Manual
Xantech Stereo System XDT77 User Manual
Zanussi Gas Grill 178094 User Manual
Zenith Flat Panel Television L15V36 User Manual
Zenoah Blower EBZ3000 User Manual